Herunterladen Inhalt Inhalt Diese Seite drucken

Adjusting The Wattage In Vt Mode - INNOCIGS EVIC AIO SET Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

INNOCIGS EVIC AIO – OPERATING & CHANGING THE MODES

3. Adjusting the Wattage in VT Mode

You can set the maximum power output in VT mode. Press the fire button 3 times to enter the menu. Press the "down" button, so
that the second line flashes. Then press the up button to adjust the wattage. Confirm this by pressing the fire button.
Note
a. The VT mode supports a maximum resistance of 1.5 ohms. The device automatically switches to the VW mode when the
resistance is more than 1.5 ohms.
b. When using coils with kanthal winding, the unit will change to VW mode after two seconds.
52

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis