Restore Factory Settings - HomeMatic HmIP-KRCA Bedienungsanleitung

1x orange
and 1 x green
lighting (after
inserting bat-
tery)
Long and
short orange
flashing (alter-
nating)
9

Restore factory settings

The factory settings of the device can be re-
stored. If you do this, you will lose all your set-
tings.
To restore the factory settings of the key ring remote
control, please proceed as follows:
Open the battery compartment (H) at the rear
•
by pushing the battery compartment cover away
from the device. You will need to apply some
pressure to do this (see figure 2).
• This will open the catch and the battery compart-
ment cover can be opened (the cover remains
attached to the housing).
• Remove one battery.
• Insert the battery ensuring that the polarity is
Test display
Update of
device software
(OTAU)
Restore factory settings
Once the test
display has stopped,
you can continue.
Wait until the up-
date is completed.
37