Cleaning And Care - NUK Easy Control 200 Bedienungsanleitung

Note:
• Where the batteries are new and fully
charged, the parent unit 7 can be
disconnected from the mains adapter and
operated on a portable basis for up to 6
hours.
• The charging indicator 2 flashes quickly
(approx. every second) when the batteries
are almost empty.
• There is no warning when the batteries are
completely empty. You should therefore
regularly check the connection.
7.1 Cleaning
Warning! To avoid the risk of electric
shocks, injuries and damage:
– Always
adapter from the power socket
before cleaning the device.
– Never immerse the individual parts
in water.

7. Cleaning and care

disconnect the
• If you and the parent unit 7 move too far
from the baby unit 13, a warning will
appear:
– The range indicator 3 will begin to flash.
The parent unit 7 will try to re-establish
its connection with the baby unit 13.
– If it is unable to establish a new
connection
parent unit 7 will emit a warning in the
form of double beeps. You should then
move closer to the baby unit 13.
Caution!
abrasive, corrosive or scratching cleaning
agents, as these could damage the device.
1. If necessary, wipe the individual parts with
mains
a damp cloth.
2. Only use the baby monitor again when all
the parts have fully dried out.
25
within 20 seconds,
Under no circumstances
the
use