Functions; Use - Heating Or Boiling Water - Unold 18585 Bedienungsanleitung

9. Close the lid by pressing lightly.
10. Place the kettle so it is straight on the base, to ensure that contact is estab-
lished with the base.
11. Press the "
12. When the water is boiling the automatic boil dry circuit switches off the
appliance.
13. For hygienic reasons, please discard the water from the first boiling.

FUNCTIONS

The glass electronic kettle has two functions:
Heating or boiling water
The water is warmed to the pre-set temperature. Thus you obtain hot to briskly
boiling water, as desired. The temperature can be set in 10°C increments be-
tween 60°C and 100°C.
The factory preset is 100°C.
Keeping warm
The water is kept warm at the desired temperature after heating. The tempera-
ture at which the water is kept warm can be set in 10°C increments between
60°C and 100°C. The maximum temperature at which the water can be kept
warm is the boiling temperature.
There is no factory preset for the temperature at which the water is kept warm.
The keep warm function is ended automatically when the kettle is removed from
the base.
Through this function you can ensure that your water also still has the desired
temperature, even if you do not use it immediately after concluding the boiling
process.

USE - HEATING OR BOILING WATER

1. Connect the base to the power supply (220–240 V~, 50/60 Hz) via the
power cord.
2. All indicator lights briefly light up and indicate that the appliance is ready
for operation.
3. Remove the kettle from the base.
4. Press the "Unold" opening button in the centre of the lid. The lid is unlocked
and opens automatically.
18
" button to switch on the appliance.
Copyright UNOLD AG | www.unold.de