Installing Batteries - Sony FWD-42PV1 Bedienungsanleitung

qk CHROMA button
Adjusts the chroma when the picture mode is set to
any of "User1" to "User3." Press this button and
adjust the chroma with the M/m or </, buttons 9.
ql CONTRAST +/– button
Adjusts the contrast when Picture Mode is set to any
of "User1" to "User3."

Installing batteries

Insert two size AAA (R03) batteries in correct
polarity.
• In normal operation, batteries will last up to half a
year. If the Remote Commander does not operate
properly, the batteries might be exhausted sooner.
Replace them with new ones.
• To avoid damage from possible battery leakage,
remove the batteries if you do not plan to use the
Remote Commander for a fairly long time.
When the Remote Commander does not work
Check that the POWER/STANDBY indicator lights
up and the Control Mode in the Remote menu is not
set to "Display Unit Only." The Remote Commander
operates the display only when both of the two
conditions below are met.
• The display is turned on, or it is in the standby mode.
• The Control Mode in the Remote menu is set to
"Display + Remote" or "Remote Only."
For details on the Control Mode, see "Control Mode" on
page 20 (GB).
For Customers in Taiwan only
Be sure to
install the
negative < –
end first.
Location and Function of Parts and Controls
13
(GB)