• The insulation of the cooling device
contains flammable cyclopentane and
requires special disposal procedures.
Deliver the cooling device at the end of
its life-cycle to an appropriate recycling
center.
• Do not place the cooling device near
naked flames or other heat sources
(heaters, direct sunlight, gas ovens
etc.).
• Do not fill the inner container with ice
or fluids.
• Never immerse the cooling device in
water.
• Protect the cooling device and cables
against heat and moisture.
• The cooling device shall not be ex-
posed to rain.
• To enable the refrigerant to circulate
properly, the cooler may not tilted by
more than 30 °. Use a spirit level to en-
sure the cooler is level.
• Risk of overheating! Ensure at all
times that there is sufficient ventilation
on all four sides of the cooling device.
Keep the ventilation area free of any ob-
jects that could restrict the air flow to
the cooling components. Do not place
the cooling device in closed compart-
ments or areas with none or minimal air
flow.
5 Intended use
The cooler is suitable for cooling and freezing food. The
cooler is also suitable for use in vehicles. The cooler is
designed to be operated from a DC power supply sock-
et of a vehicle or from an AC power supply.
The cooler is also suitable for camping use.
The cooler is intended to be used in household and sim-
ilar applications such as
• Staff kitchen areas in shops, offices and other
working environments
• Farm houses
• Clients in hotels, motels and other residential type
environments
• Bed and breakfast type environments
CFX2 28, CFX2 37, CFX2 45, CFX2 57 EN
• Catering and similar non-retail applications
The cooler is not suitable for:
• Quick freezing food
• Storage of corrosive, caustic, or solvent-contain-
ing substances
• Use as a built-in appliance
This cooler is only suitable for the intended purpose and
applicatio in accordance with these instructions.
This product is only suitable for the intended purpose
and application in accordance with these instructions.
This manual provides information that is necessary for
proper installation and/or operation of the product.
Poor installation and/or improper operating or main-
tenance will result in unsatisfactory performance and a
possible failure.
The manufacturer accepts no liability for any injury or
damage to the product resulting from:
• Incorrect installation, assembly or connection, in-
cluding excess voltage
• Incorrect maintenance or use of spare parts oth-
er than original spare parts provided by the manu-
facturer
• Alterations to the product without express per-
mission from the manufacturer
• Use for purposes other than those described in
this manual
Dometic reserves the right to change product appear-
ance and product specifications.
6 Saving energy
Choose a well ventilated location which is pro-
tected from direct sunlight.
Allow warm food to cool down first before plac-
ing it in the cooling device to keep cool.
Do not open the cooling device more often than
necessary.
Do not leave the cooling device open for longer
than necessary.
If the cooling device has a basket: For optimal en-
ergy consumption, position the basket according
to its position on delivery.
On a regularly basis, ensure that the lid seal still fits
properly.
13