Werbung
Modello - Modèle - Model
Modell - Modelo - Modelo
Fabbricante - Constructeur - Manufacturer
Hersteller - Fabricante - Fabricante
• Clean the condenser with a brush or a
vacuum cleaner, acting in the direction of
orientation of the fins so as not to bend or
deform them.
• Remove the diffuser and clean it. We
recommend carrying out this operation at
least once a month and in any case
whenever the diffuser is dirty. Failure to
clean
could
malfunction. Be careful NOT to damage
the speaker. Make sure the speaker is
positioned correctly during assembly.
N°DOC. UM000719 REV. "A" - 13/11/23
SOUL - SOUL B - SOULD LS
Fig. 25
cause
the
display
Fig. 26
Epta Spa - Via Mecenate, 86 - 20138 Milano (MI) ITALIA
Tel. 02/55403211 Telefax 02/55401023
Defrost the cabinet EVERY THREE MONTHS
to allow the ice to melt which may have formed
on the fins of the evaporator preventing correct
operation. The duration of the defrosting
activity is regulated directly in the factory. Any
adjustments are reserved exclusively for the
technical service department. The defrosting
water is collected by a special drain. Periodically
check that the defrosting water drains normally.
If not, intervene immediately using a non-
pointed flexible probe.
Do as indicated to clean the internal parts
MONTHLY, but in this case foresee a longer
waiting time to allow the ice to melt completely.
9.10
Emergency situations
The cabinet does not start or it stops:
• Check there is no electrical blackout.
• Check that the main power switch on the
wall is on.
• Check the cabinet plug is inserted into the
socket.
If the power outage does not depend on these
reasons, contact the nearest authorised service
centre and empty completely and immediately
to
store the product in cold rooms or refrigerators
that can maintain the preservation temperature.
17/20
User manual
IT
FR
EN
EN
DE
ES
PT
Werbung
