thyracont VD810 Betriebsanleitung Seite 48

48
Display
Device
Alarm Buzzer
Max. Operation Time
Clock
Display
Interfaces
The menu is used to select menu language and display units. All settings must
finally be confirmed with the "OK"-key.
Interfaces
Device
Alarm Buzzer
Max. Operation Time
Clock
Display
Interfaces
This menu is used to adjust settings of the USB interface and the optional Blue-
tooth interface of the VD810.
Ex works the device is configured as mass storage device ("MSD Enabled"), so
the stored measurement files will be displayed when the VD810 is connected to a
PC. If required this function can be disabled selecting "MSD Disabled".
Under menu item "USB Charge Mode" a limit for the admissible charging current
can be set. This value must be supported by the connected current supply in order
to avoid damage of the USB port.
Menu item "Bluetooth" is used to enable the device's optional Bluetooth interface.
With standard setting a pass key is generated to establish a secured connecti-
on. With menu item "Bluetooth Security" you can optionally choose to establish
connections without pass key. "Bluetooth Reset" is used to delete established Blue-
tooth connections.
All settings must finally be confirmed with the "OK"-key.
VD810-USB-240130
Display
Language
Pressure Unit
Leakage Rate Unit
Pumping Speed Unit
Interfaces
USB MSD
USB Charge Mode
Bluetooth
Bluetooth Security
Bluetooth Reset