Post-Pressing Auxiliary Device - NovoPress HA5 Betriebsanleitung

9
6

Post-pressing auxiliary device

Pressing operations which have not been completed, due to a power loss for example, must be
repeated. The pre-pressed fitting is smaller than a non-pressed fitting.
The post-press auxiliary device facilitates the correct placing of a press ring in this type of
situation.
Slide the post-pressing auxiliary device on middle scale D of the press ring as illustrated, and
fasten with knurled bolt A. Slot bottom N of the post-pressing auxiliary device must lie against
the scale.
A
N
D
For positioning the press ring, see operating manual point 5.4 onwards