Herunterladen Diese Seite drucken

HANSGROHE AXOR Citterio M 34435000 Montageanleitung Seite 8

Vorschau ausblenden Andere Handbücher für AXOR Citterio M 34435000:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Attention! The fitting must be installed, flushed and
tested after the valid norms.
Assembly
1. Flush through the supply pipes.
2. Mount the S - unions and align them.
3. Fasten the mixer with the washers.
Large differences in pressure between the hot and
cold water supply should be balanced.
Adjustment
Correction is necessary if the temperature measured
at the take off point differs from the temperature set
on the scale. To adjust please see page 27.
Operation 34435000
By turning the handle on the left hand side the ther-
mostatic mixer is opened, closed and the flow can
be changed from tub to shower function.
The temperature is selected by turning the graduated
handle on the right side.
Operation 34635000
The mixer is operated by turning the handle on the
left hand side.
The temperature is selected by turning the graduated
handle on the right side.
Temperature limitation
The temperature is limited by the safety check to 38°
C (100° F). If a higher temperature is required, it is
possible to override the safety stop by depressing
the safety button.
To garantee a smooth running of the thermoelent, it
is necessary from time to time to turn the thermostat
from total hot to total cold.
Attention!
The mixer is equipped with non return valves.
The non return valves must be checked regularly accor-
ding to DIN EN 1717 in accordance with national or
regional regulations (at least once a year)

English
Using the thermostatic mixer in conjunc-
tion with combination boilers.
If fitting a hand shower remove the water limiter
from the shower.
If the continuous water heater causes any problems,
or you have different water pressures you must
install a water limiter to the cold supply, (ordered
separately,article number 97510000).
Technical Data
Operating pressure:
Recommended operating pressure: 0,1 - 0,5 MPa
Test pressure:
(1 MPa = 10 bars = 147 PSI)
Hot water temperature:
Recommended hot water temp.:
Rate of flow by 0,3 MPa:
Anti-pollution function
Spare parts (see page 3)
1�
thermoelement
2�
shut off and diverter unit
3�
handle
4�
aerator cpl.
5�
non return valve
6�
noise reduction
7�
s-unions
8�
escutcheon
9�
safety set for temperature control 98916000
10�
nut
11�
safety set for flow control
12�
filter packing
13�
handle for thermostat
14�
nut
max. 1 MPa
1,6 MPa
max. 80° C
65° C
18 l/min
98282000
98283000
34492000
96512000
96737000
96429000
94140000
96467000
98913000
95042000
96922000
34493000
96157000

Werbung

loading

Diese Anleitung auch für:

Axor citterio m 34635000