Herunterladen Diese Seite drucken

Electrolux EHS60210P Benutzerinformation Seite 18

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

18 electrolux
A control bar
11
12
13
/
14
RESIDUAL HEAT INDICATOR
Warning!
residual heat!
DAILY USE
ACTIVATION AND DEACTIVATION
Touch
for 1 second to activate or deac-
tivate the appliance.
AUTOMATIC SWITCH OFF
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated.
• You do not set the heat setting after you
activate the appliance.
• You spill something or put something on
the control panel for more than 10 sec-
onds, (a pan, a cloth, etc.). The sound
operates some time and the appliance
deactivates. Remove the object or clean
the control panel.
• You do not deactivate a cooking zone or
change the heat setting. After some time,
comes on and the appliance deacti-
vates. See the table.
• The relation between heat setting and
times of the Automatic Switch Off func-
tion:
• ,
-
— 6 hours
-
— 5 hours
— 4 hours
-
— 1.5 hours
THE HEAT SETTING
Touch the control bar at the heat setting.
Move your finger along the control bar to
change the setting. Do not release before
you have a correct heat setting. The display
shows the heat setting.
Sensor field
The risk of burns from
Function
To set the heat setting.
To set a cooking zone.
To increase or decrease the time.
To activate and deactivate the outer rings.
ACTIVATION AND DEACTIVATION OF
THE OUTER RINGS
You can adjust the surface you cook to the
dimension of the cookware.
To activate the outer ring touch the sensor
field
/
. The indicator comes on. For
more outer rings touch the same sensor
field again. The subsequent indicator
comes on.
Do the procedure again to deactivate the
outer ring. The indicator goes out.
AUTOMATIC HEAT UP
You can get a necessary heat setting in a
shorter time if you activate the Automatic
Heat Up function. This function sets the
highest heat setting for some time (see the
diagram), and then decreases to the neces-
sary heat setting.
To start the Automatic Heat Up function for
a cooking zone:
1. Touch
(
2. Immediately touch the necessary heat
setting. After 3 seconds
in the display.
To stop the function change the heat set-
ting.
comes on in the display).
comes on

Werbung

loading