EHEIM air pump 100 Bedienungsanleitung Seite 9

The product is approved in accordance with the respective
national regulations and guidelines and complies with the EU
standards
Do not dispose of this product as normal household waste. Take
it to your ocal refuse collection site
Putting the unit into operation
Check the unit for damage and for completeness
Mounting location I Positioning:
Always install above the water level and outside the aquarium
(Fig. B) to prevent water from running back into the air pump.
Donot place on or abovethe aquarium.Choosethe mounting
location / positioning so that the aerator cannot drop into the
water or 'hwalk".We recommend mounting using the wall mounting
eyelet (Fig. B).
Cut the hoseO to the required ength and connectthe outlet
@to the aquariumaerator Placethe outlet with suction
device in the aquarium (Fig. B)
If only one accessory is connected to EHEIM air pumps 200
and 400, which are provided with two air connections,
please use a T-type connector available from your dealer.
Never operate an air connection without a „load", i.e.
without hose and outlet
Placethe outlet@ in the aquarium
Connect the mains plug with the socket.
Monitor the water level and ensure the correct
Air volume adjustment
The required air volume can be adjusted by turning the control
knob O
Settherequired bubblepattern (5 attheoutlet@(e g using
a coin) (Fig. B)
9
EHEIM
for the first time
drip loop. (Fig. B)