Werbung
FX-33BK/FX-33LBK
|
2-(1) Removal of Top Cover
1. Remove two screws @
on both sides.
2. Remove three screws
@ on the rear panel.
3. Lift up the rear end of the top cover and take it out.
2-(2) Removal of Front Panel
1. Remove three screws ©
fixing the front panel from the
bottom.
2. Remove three plastic rivets
@
fixing the front panel
from the top.
2-(3) Removal of Tuner P.C.B.
1. Remove three screws
@ fixing the P.C.B.
2. Remove
six screws
6)
fixing the antenna
terminal,
CATV connector, synchro jack and pin jack.
Power Supply & Display
P.C. Board
=|
|
2-(7) Use of new-type Connector
1. Slide the cover upward.
2-(5) Removal of Front P.C.B. @
1. Pull out four plastic rivets
@
fixing it to the front
bracket.
2-(6) Removal of Front P.C.B. ©
1. Pull out a plastic rivet © fixing it to the front bracket.
2. Extract the wires.
3. Insert
the
wires
after
pushing
in the
cover.
Werbung
