Leifheit VACU POWER 300 Bedienungsanleitung Seite 49

G
Vacuum packaging in a bag
1. F ill the food product or objects that you want
to store in a bag intended for this purpose.
The open end of the bag must be clean, free
from dust, dry and smooth.
2. O pen the cover and place the open end of the
bag onto the sealing strip. Make sure that the
bag reaches into the vacuum chamber.
3. C lose the cover on both sides until you hear it
engaging. Use both hands for this purpose.
4. Press the AUTO button. The bag is automatic-
ally vacuumed and then sealed (the indicator
lamp of the AUTO and SEAL button illumin-
ate).
The procedure is ended when the vacuum
pump switches off and the indicator lamp
goes out.
Note:
Pressing the PUlSe button allows the
vacuuming procedure to also be initiated
and controlled manually; this allows
pressure-sensitive food products to be
particularly carefully.
Then the sealing procedure is initiated by
pressing the SeAl button.
T he vacuuming and sealing procedure can be
cancelled at any time using the STOP button.
D uring the vacuum packaging, a very high
pressure is generated in the bag. Observe the
procedure in order to avoid the food products
being sealed from being squashed by the
pressure. You can interrupt the automatic
vacuuming procedure using the
SeAl button and initiate the sealing earlier.
5. P ress both unlocking buttons at the same
time in order to open the appliance cover and
remove the bag.
Check the sealed bag; it should have a double
sealing seam and not have any folds other-
wise the sealing seam is not air tight.
All manuals and user guides at all-guides.com
H
Sealing a bag from a bag roll
1. Roll out the film to the length you require and
cut it to the desired length, ensuring for
a clean cut.
2. Open the cover and place the one end of the
bag onto the sealing strip. Make sure that the
bag does not reach to the vacuum chamber.
3. Close the cover on both sides until you hear it
engaging. Use both hands for this purpose.
4. Press the SeAl button to start the sealing.
The bag is sealed when the indicator lamp
goes out.
5. Press both unlocking buttons at the same
time in order to open the appliance cover and
remove the finished bag. This is now prepared
for vacuuming.
GB
49