Pelgrim IK8093R Serie Bedienungsanleitung Seite 42

OPERATION
Read the 'Before first use' section carefully before you start cooking. This prevents
improper use of the hob.
When the hob is connected to the power supply for the first time or after a power failure,
the menu button flashes for 2 minutes. The hob is in the setting mode. You can use the
hob simply by switching it on with the on/off button.
Intelligent hob with automatic pan detection
This is an intelligent hob with automatic pan detection. When a pan is placed on a zone, the
corresponding slide control lights up and the cooking process can be started, by selecting a
power level and a timer, for example. The buttons for the available functions also light up. Power
settings or functions that are not lit cannot be selected at that time. Power settings or functions
that are active are lit brightest.
Switching on and setting power
Make sure the bottom of the pan and the surface of the cooking zone are clean and dry.
1. Press the plus (+) button until you hear a sound signal.
A brief animation appears.
▷
▷ The available functions are displayed dimly.
2. Place a pan in the middle of a cooking zone within 30 seconds.
A '0' appears on the corresponding cooking zone display and the corresponding slide
▷
control lights up.
Other available functions are displayed dimly.
▷
3. Use the slide control that corresponds to the cooking zone to select the desired setting.
▷ The cooking zone starts automatically at the level that has been set.
The power setting appears on the display and the setting can also be seen on the slide
▷
control (the numbers are brighter).
▷ Set a higher or lower power level with the slide control.
The hob switches off if no setting or function is selected within 30 seconds.
EN 12