Beko B3WFU57412W Bedienungsanleitung Seite 29

cancelled or the step is complete. If the
function is not cancelled, it will be active in
the subsequent washing cycles as well.
• Extra Rinsing
This function can be selected by pressing
and holding the related auxiliary function
button for 3 seconds.
This function enables the product to make
additional rinsing in addition to the one
already made after the main wash. Thus,
the risk for sensitive skins (babies, allergic
skins, etc.) to be effected by the minimal
detergent remnants on the laundry can be
reduced.
• Child Lock
Use Child Lock function to prevent children
from tampering with the machine. Thus you
can avoid any changes in a running pro-
gramme.
You can switch on and off the ma-
chine with On / Off button when the
Child Lock is active. When you
switch on the machine again, pro-
gramme will resume from where it
has stopped.
When the Child Lock is enabled, an
audio warning will be given if the
buttons are pressed. Audio warning
will be cancelled if the buttons are
pressed five times consecutively.
To activate the child lock:
Press and hold the related auxiliary func-
tion button for 3 seconds. After the count-
down as "3-2-1" on the display is over, Child
Lock symbol appears on the display. When
this warning is displayed, you can release
the Auxiliary Function button 3.
To deactivate the child lock:
Press and hold the related auxiliary func-
tion button for 3 seconds. After the count-
down as "3-2-1" on the display is over, Child
Lock symbol disappears.
• Bluetooth
You can use the bluetooth connection func-
tion to pair your machine with your smart
device. This way, you can use your smart
device to get information about your ma-
chine and control it.
To activate bluetooth connection:
Press and hold Remote Control function
button for 3 seconds. Countdown "3-2-1"
will be displayed, and then Bluetooth icon
will appear on the display. Release Remote
Control function button. The bluetooth icon
will flash while the product is pairing with
smart device. If connection is successful,
icon will remain on.
To deactivate bluetooth connection:
Press and hold Remote Control function
button for 3 seconds. Countdown "3-2-1"
will be displayed, and then Bluetooth icon
will disappears on the display.
First setup of the HomeWhiz applic-
ation must be complete for the
bluetooth connection to be activ-
ated. After setup, pressing the re-
mote control function button while
the knob is at Download Pro-
gramme/Remote Control position
will automatically activate the
bluetooth connection.
6.9 End Time
Time display
When the end time function is selected, the
remaining time until the programme starts
is shown in hours such as 1h, 2h, and the
remaining time to complete the programme
after your programme starts is shown in
hours and minutes as in the 01:30 example.
EN / 29