Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7. Further settings
Note: This function is not available if the automatic data logger is enabled.
Press the "SET" button (3-8 Fig.1) for 2 seconds to enter the settings menu.
Then press the "SET" button (3-8 Fig.1) several times in a row in order to choose between the following
functions.
Sd F
format SD card
dAtE
date / time (year / month / day, hour / minute / second)
SP-t
recording interval (normal recording mode)
HSPt
sampling rate (maximum value registration)
PoFF
automatic power off function (on / off )
bEEP warning sound or beeper (on / off)
unit
display unit (kg / lb / N)
dEC
decimal point format (point / comma)
ESC
exit the settings menu
Note: Press the "ESC" button (3-5 Fig.1) to exit the settings menu.
7.1
Format the SD card
Display value: "Sd F"
1. To format the SD card, enter the relevant menu, use the "
Fig.1) to choose "yES" or "no" and confirm with the "ENTER" button (3-6 Fig.1). By selecting
"yES", you confirm the formatting; by "no" you stop the process.
2. "yES Enter" will appear in the display. Confirm again with ENTER. All existing data will be
removed from the memory card.
7.2
Date / Time
Display value: "dAtE"
1. Enter the relevant menu, use the "
value. Confirm every entry with the "ENTER" button (3-6 Fig.1). The cursor will then switch to the
next digit.
Note: the entry sequence is year / month / day / hour / minute / second.
2. Finally, confirm with the "SET" button (3-8 Fig.1) to save the value. The display will now switch to
the next menu item automatically.
Note: the internal clock keeps running even when the device is off (for as long as the batteries supply
sufficient voltage).
Manual
" (3-4 Fig.1) and "
" (3-4 Fig.1) and "
" buttons (3-7 Fig.1) to change the
10
" buttons (3-7
Werbung
Kapitel
Inhaltsverzeichnis
