Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Electrical Connection:
Connect the power supply cable to the general power supply network and in parallel connect the Flow
connector to the recirculation pump if present on the system; the Flow inlet (230 Vac) is connected to the
Flow function, if enabled (ON) it allows the dosing to be activated when the system recirculation is present.
Connect the level probe (included in
the package) to the "Level Probe"
connector (Arrow).
The programming menu can be accessed by simultaneously pressing the Enter and Esc keys for at least 5
seconds.
If a password other than 0000 is set, the system will ask for the password to access the programming menu.
Upon release of the keys the display will show:
Display
Language
English
Dosing %
100 %
Weekly Timer
Advanced
Access the submenu with the Enter key.
0000137176
Flow
Level
Not Used
Not Used
230 Vac
Circulating pump
Programming
EN, FR, DE, ES, IT
Dosing in % from 10 to 100%
10 programmable schedules for dosing are
accessed.
Four submenus are accessed with Advanced:
rev. 1.0
Alarm
Relay
L
N
100...240 Vac
Settings
Clock
Calibration
Flow
Password
The S.V. (Solenoid
Valve) terminals can
be connected to the
relay, an external
system that can
activate or delay the
peristaltic pump
depending on the
relay management
(see Weekly Prog.).
2
Werbung
