nedis SPBT2460BK Kurzanleitung Seite 6

You can pair two SPBT2460BK products via Bluetooth® to create
TWS.
This function is only available in Bluetooth® mode.
4
1. Make sure both products are switched on.
2. Press and hold the mode button A
products to pair both products with each other.
The products emit a tone to indicate pairing. The products emit
another tone to indicate pairing is successful.
3. Press and hold the mode button A
products or switch off the products to disconnect the two
products.
Answer phone calls
This function is only available in Bluetooth® mode.
4
• Press the play/pause button A
phone call.
• Press and hold the play/pause button A
switch to phone during call.
Troubleshooting
Problem
The product does
not switch on.
Clean the product every month.
1. Switch off the product.
2. Disconnect the product from the power outlet.
3. Clean the product with a soft, clean, dry cloth.
Disposal
The product is designated for separate collection
at an appropriate collection point. Do not dispose
of the product with household waste.
For more information, contact the retailer or
the local authority responsible for the waste
management.
3
Possible cause
The battery power
is low.
An internal
malfunction has
occurred.
6
on one of the
4
on one of the
4
to answer or finish a
to reject a call/
3
Possible solution
Charge the
product
Press the reset
button in the AUX
port A
9
small pin to reset
the product.
with a