Dell PowerEdge 4820 Installationsanleitung Seite 27

All manuals and user guides at all-guides.com
Figure 1-12. Installing the Front Stabilizer Feet
1
1 front stabilizer foot (2)
Installing the Side Stabilizer Feet
1 Remove the lower side panels (see "Removing the Lower Side Panels"
on page 13).
2 On the side of the rack frame's bottom rail, locate the four holes
(see Figure 1-13).
3 Position each stabilizer foot against the base of the rack frame and align its
holes with the corresponding holes in the frame.
Installation Guide
25