Dell PowerEdge 4820 Installationsanleitung Seite 10

Recommended Tools and Supplies
You may need the following tools and supplies to install the rack:
• #2 Phillips screwdriver
• Flat head screwdriver
• 12-mm wrench
• Needle-nose pliers
• 4-mm Allen wrench (if you want to reverse the direction that the front
door opens)
• Keys to the rack doors and side panels
• 13-mm wrench (for rack removal from pallet)
• 17-mm wrench (for rack removal from pallet)
Removing and Replacing the Rack Doors
WARNING:
Because of the size and weight of the rack cabinet doors,
never attempt to remove or install them by yourself.
WARNING:
When storing the doors, lay the doors flat so they cannot fall over and
accidentally injure someone.
Removing the Front Door
1 Pull the door latch and open the front door all the way (see Figure 1-1).
2 While holding the door, pull the hinge pin upward so that it clears the
door's hinge-pin housing (see Figure 1-1).
The hinge pin's retention clip prevents the hinge from being pulled out of
the hinge body.
8
Installation Guide
All manuals and user guides at all-guides.com