Werbung
Statement 7012 Equipment Interfacing with AC
Power Ports
This equipment shall be connected to AC mains provided with a surge protective device (SPD) at the service
equipment complying with NFPA 70, the National Electrical Code (NEC).
Statement 7013 Equipment Bonding Networks CBN
Note
This equipment is suitable for installations utilizing the insert Common Bonding Network (CBN).
Statement 7016 Battery Return Conductor
The battery return conductor of this equipment shall be treated as DC-1.
Statement 7017 Minimum Steady State DC Input
Voltage
This equipment will operate without degradation at a minimum steady state voltage of -40V. The nominal
DC input voltage rating is -48V.
Statement 8015 Installation Location Network
Telecommunications Facilities
This equipment is suitable for installation in Network Telecommunications Facilities.
Statement 8016 Installation Location Where the NEC
Applies
This equipment is suitable for installation in locations where the NEC applies.
Regulatory Compliance and Safety Information Cisco Catalyst 9300 Series Switches
14
Regulatory Compliance and Safety Information Cisco Catalyst 9300 Series Switches
Werbung
