Maxi-Cosi CabrioFix Gebrauchsanweisung Und Garantie Seite 11

EN
Shell
1
Belt buckle
2
Crotch strap with belt pad
3 a
Shoulder belts with belt pads
3 b
Slots to adjust shoulder belts
4
Support pillow
5
Carrying handle
6
Push button for adjusting carrying handle
7
Belt hook for lap section of safety belt
8
Rear belt hook for shoulder section of safety belt
9
Belt tensioner strap
10
Control button of the quick adjuster
11
Control button for removing car seat from
12
Maxi-Cosi or Quinny frame
Belt hooks
13
Instuctions and airbag warning
14
sticker
Rim (for storing sun canopy)
15
Sun canopy (built-in)
16
Instruction manual
17
Storage compartment
18
Mounting bars for Maxi-Cosi FamilyFix and
19
Maxi-Cosi EasyBase 2
20
Safety
General Maxi-Cosi CabrioFix instructions
1. You are personally responsible for the safety of
your baby at all times.
2. Never hold your baby on your lap when driving.
3. Do not use the Maxi-Cosi CabrioFix for more
than 5 years.
4. Do not use second-hand products where the
history is unknown.
5. Replace the Maxi-Cosi CabrioFix after an
accident.
6. Read this instruction manual carefully and keep
it in the storage compartment in the
Maxi-Cosi CabrioFix.
Warning: Do not make any changes to the
Maxi-Cosi CabrioFix whatsoever, as this could affect
the performance of the car seat and render it
unsafe.
Maxi-Cosi CabrioFix maintenance instructions
1. The Maxi-Cosi CabrioFix must undergo regular
maintenance. Do not use lubricants or aggressive
cleaning agents.
2. The cover, cushions and belt pads of the
Maxi-Cosi CabrioFix can be removed in order
for these to be cleaned (also see washing
instructions). The flexible plastic edge can be
cleaned with water, soap and a soft cloth.
3. If the cover needs to be replaced at any time,
only use official Maxi-Cosi fabrics.
The Maxi-Cosi CabrioFix and your baby
1. Never leave your baby unattended.
2. Always secure your baby with the harness belt.
3. Before every use, make sure the harness is not
damaged or twisted.
4. Make sure you can fit no more than one finger
between the harness and your baby (1cm).
5. Only use the support pillow of the Maxi-Cosi
CabrioFix when the shoulder belts are in the
lowest position.
Warning: Never place the Maxi-Cosi CabrioFix on
an elevated surface (such as a table or chair).
Maxi-Cosi CabrioFix car use
1. Always check to make sure the car seat can be
installed properly in your car before purchasing
it.
2. Make sure that any fold-down rear seat is locked
into position.
3. Prevent the Maxi-Cosi CabrioFix from becoming
trapped or weighed down by luggage, seats
and/or slamming doors.
4. Make sure that all luggage and other loose
objects are secure.
5. The safest place for your baby is the rear of your
vehicle, however if you need to install the seat in
the front passenger seat, please ensure that any
airbag is deactivated.
6. Only use a forward-facing seat that is fitted with
a 3-point safety belt that complies with the ECE
R16 standard (at a minimum).
7. Make sure the car safety belt buckle runs in a
straight line and stays below the belt hook of the
Maxi-Cosi CabrioFix. See the p.8 example.
8. The car safety belt must be threaded along
all blue markings. For proper installation
instructions, see pages 8-9 and/or the sticker
on the side of the Maxi-Cosi CabrioFix.
9. Always cover the Maxi-Cosi CabrioFix when
exposed to direct sunlight in the car. Otherwise,
the cover, metal and plastic parts could become
too hot for your child's skin.
Warning: The Maxi-Cosi CabrioFix may only be
installed in a rear-facing position in the car.
EN
21