BONFIGLIOLI Vectron ACTIVE Betriebsanleitung Seite 31

8.1.3
In the terminal program of the PC, the following connection settings must be made:
For information on how to set these parameters, please refer to the operating
instructions or the help function of your terminal program. After the connection has
been established successfully, enter the following AT commands via the terminal
program:
Confirm each command by pressing the Enter key. After processing the command
successfully, the modem signals "OK" in the terminal program window. For more
information, refer to the modem operating instructions.
8.1.4
Provided that a suitable emulation driver is available, the control software VPlus
additionally supports the following communication devices
as communication media for establishing a teleservice connection.
Note:
11/07
11/07
All manuals and user guides at all-guides.com
Modem Configuration for Remote Connection to
VCB - Frequency Inverters
Baud rate
9600 bits per second
Data bits
7
Parity
even
Stop bits
1
Flow control Hardware
at &F0 -> Reset to factroy default
at Y0 -> Select NVRAM Nr. 0
at s0=1 -> selected modem answers (after 1
at &b1 -> The baud rate of the serial interface is set to a fixed value.
at &w0 -> Save the current configuration in the modem memory.
Communication media
− internal analog modems (e.g. in PCMCIA format),
− external ISDN adapters at COM port,
− external ISDN modems and
− GSM radio modems
When using these media, make sure that on the plant side a compatible
communication device is available. This device must also feature a
compatible serial interface for connection with the frequency inverter.
Symbol line in the "hyperterminal"
st
ring tone)
14
14