Herunterladen Diese Seite drucken

Beko F60096EB Bedienungsanleitung Seite 20

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 22
• The fridge temperature is adjusted to a very high value. >>>Fridge
compartment temperature setting has an effect on the temperature of the
freezer. Change the temperatures of the fridge or freezer and wait until the
relevant compartments attain a sufficient temperature.
• Doors are opened frequently or left ajar for a long time. >>>Do not open the
doors frequently.
• Door is ajar. >>>Close the door completely.
• The freezer is plugged in or loaded with food recently. >>>This is normal.
When the freezer is plugged in or loaded with food recently, it will take longer
for it to attain the set temperature.
• Large amounts of hot food might be put in the freezer recently. >>>Do not
put hot food into the freezer.
• Vibrations or noise.
• The floor is not level or stable. >>> If the freezer rocks when moved slowly,
balance it by adjusting its feet. Also make sure that the floor is strong enough
to carry the freezer, and level.
• The items put onto the freezer may cause noise. >>>Remove the items on
top of the freezer.
There are noises coming from the freezer like liquid flowing, spraying, etc.
• Liquid and gas flows occur in accordance with the operating principles of your
freezer. It is normal and not a fault.
Whistle comes from the freezer.
• Fans are used in order to cool the freezer. It is normal and not a fault.
Condensation on the inner walls of freezer.
• Hot and humid weather increases icing and condensation. It is normal and not
a fault.
• Doors are opened frequently or left ajar for a long time. >>>Do not open the
doors frequently. Close them if they are open.
• Door is ajar. >>>Close the door completely.
Humidity occurs on the outside of the freezer or between the doors.
• There might be humidity in the air; this is quite normal in humid weather.
When the humidity is less, condensation will disappear.
Bad odour inside the freezer.
19
EN

Werbung

loading

Diese Anleitung auch für:

Bu 1200Bu 1201Bu 1203nBu1204n