Werbung
Verfügbare Sprachen
Verfügbare Sprachen
.. Connecting a device via Bluetooth®
In Bluetooth mode, you can receive wireless audio signals from an external Blue-
tooth-enabled audio output device. Make sure the two devices are not more than
metres apart.
Only one Bluetooth device can be paired with the sound system at a
time.
To connect a Bluetooth-enabled audio output device, proceed as follows:
Switch on the sound system.
Press the
FUNCTION button several times as required to switch to Blue-
tooth mode.
BT is shown on the display and the device is in search mode. During the search, the
Bluetooth LED PAIR
The sound system attempts to automatically connect itself to the last
audio output device connected via Bluetooth. If this is not possible, the
device remains in search mode.
Switch on the Bluetooth function on your audio output device and activate
search mode on it to pair the two devices.
You will find more information about the Bluetooth function of your au-
dio output device in its user manual.
The device name of the sound system "MD " will be displayed in the device list
on your audio output device as soon as the signal is found.
Select the sound system and pair the two devices. If you are prompted to enter a
password, enter "".
Device pairing is complete when the Bluetooth LED PAIR continuously lights up
blue and a signal tone sounds on the sound system.
Start audio playback on your audio output device or press the
on the sound system.
When signals are being transmitted via Bluetooth, it may not be possible
to control all operating functions using the buttons on the sound sys-
tem.
We also recommend setting the volume on your audio output device to maximum,
and fine-tuning the volume on the sound system.
To disconnect an existing Bluetooth connection, press the
A signal tone sounds and the Bluetooth LED PAIR flashes blue quickly. The sound
system is now in search mode again and you can perform a new device pairing.
flashes blue quickly.
button
button.
Werbung
