Kemper VacuFil 125 Bedienungsanleitung Seite 102

4. Check the settings of the compressed air regulator (item 2). The
compressed air regulator (item 2) is located behind the cover (item 1).
7.2.4 Setting the compressed air regulator
Item
1
2
To adjust the compressed air regulator, please proceed as follows:
1. Switch off the product and disconnect the mains plug.
2. Loosen the screws of the cover panel (item 1) and then remove it.
3. If necessary, readjust the pressure for the compressed air container to 5
bar at the pressure regulator (item 2).
7.2.5 Changing the filter – Safety instructions
The life of the filter inserts depends on the type and amount of deposited
particles.
As the dust accumulation in the filter increases, its flow resistance
increases and the extraction capacity of the product decreases.
1502821-03
Fig. 40: Setting the compressed air regulator
Tab. 41: Positions on the product
- 102 -
Description
Cover panel
Pressure regulator
EN