Tunturi Platinum Recumbent Handbuch Seite 3

Assembly instructions
Step 1: Rear support tube, rear handlebars
and meshback assembly
1. Install the Rear Support Tube (7) onto the Main Frame
with four 3/8" x 2-1/4" Hex Head bolts (65) and
four 3/8" x25 Flat Washers (84).
2. Install the Seat Handlebars (6) onto the Seat Carriage
(4) with four 3/8" x 2" Hex Head bolts (74), four
3/8" x 3" Hex Head bolts (183), eight 3/8"x19mm
fl at washers (77) and eight 3/8" Nyloc nuts (89).
3. Install Seat Back Frame (5) onto the Seat Carriage (4)
with two 3/8" x 4" Hex Head bolts (67) and two
3/8" Nyloc nuts (89).
1.
Recumbent
3