Motion Menu - Eneo HDB-2000MIR720 Montage- Und Betriebsanleitung

6.8.2 MOTION menu

MOTION Factory
Default
SELECT AREA1
WINDOW ON
SENSITIVITY 40
MOSAIC VIEW ON
DEFAULT –
Up to 3 motions detection areas can be programmed in size,
position, sensitivity and display on/off.
If MOTION in MAIN>SPECIAL menu is set to ON, 'MOTION' is
displayed on the monitor whenever the motion is detected
and the mosaic effect appears on the motioned area if MOTI-
ON VIEW is set to ON.
To enter MOTION menu, press at MAIN > SPECIAL >
MOTION > ON.
Descriptions
Selects the area to be adjusted out of AREA~AREA3.
ON displays the selected window and enables the motion detection for that area.
POSITION and SIZE can be set after pressing when WINDOW is ON. ‚POSITION'
to ‚SIZE' change can be done by pressing .
Sets the sensitivity how sensitively motion will be detected for the window
selected by AREA SELECT.
Low value is the most sensitive detection for motion.
MOSAIC VIEW setting is applied for all areas.
ON enables the mosaic display for the motion area and ‚MOTION' warning on the
bottom of monitor.
OFF disables the mosaic display and displays ‚MOTION' warning only on the
bottom of the monitor.
Loads the default for MOTION settings.
5