Pict Adjust Menu - Eneo HDB-2000MIR720 Montage- Und Betriebsanleitung

6.7 PICT ADJUST menu

PICTURE Factory
Default
WHITE BAL ATW
SHARPNESS 42
MONITOR LCD
OSD COLOR –
CORNER COMP ON
In PICT ADJUST menu, WHITE BAL, SHARPNESS, MONITOR,
OSD COLOR, CORNER COMP and D-EFFECT can be set.
To enter PICTURE menu, press at MAIN > PIC ADJUST.
Descriptions
.. ATW (Automatic Tracking White balance): WB is performed automatically.
. AWC –> SET: WB is performed only whenever is pressed.
WB stops even though the colour temperature changes.
3. INDOOR: WB is fixed for about 300K.
4. OUTDOOR: WB is fixed for about 500K.
5. MANUAL: Adjusts WB with the fixed values of BLUE and RED in MANUAL WB
menu.
Increases or decreases the sharpness of the picture.
Too much sharpness makes the image harsh and shows more noise and line
flicker at the edge of object in the picture.
Sets LCD or CRT
For LCD, GAMMA, BLUE GAIN or RED GAIN is adjustable for the best view with LCD
monitor.
Low GAMMA compensates the dark area a little but contrast becomes less a little.
High GAMMA increases contrast but looses the visibility at dark area.
For CRT, BLACK LEVEL, BLUE GAIN or RED GAIN is adjustable.
OSD color can be set out of 8 colours. Selected colour is applied to menu text and
camera title.
OUTLINE of OSD is displayed if ON.
BACK TABLE is a menu bar where cursor is located and displayed if ON.
Enhances the brightness at the corners caused by the lens or the narrow emitting
angle of IR LEDs. Picture could be noisy when it is ON.
When relatively picture looks noisy, please set it to OFF.
48