SOUNDMASTER NR565 Bedienungsanleitung Seite 23

The system is able to encode CD/DAB/Aux/Phono or cassette tape to MP3 file on USB.
Plug in the USB pen drive for recording (make sure it has enough empty space).
The system will create a music folder name - " RIP" for CD-DA encode, "REC "for DAB, Aux,
Cassette encode and "FROMCD" for CD-MP3 disc copy and encode bitrate default at 128kbps.
A) CD encoding (1 track/1 disc at 1x speed)
1. Perform normal playback of the CD track you want to encode / record.
2. Press " REC" the display will show "REC" and "ALL" and then "REC","USB" flashing and it

will be encoded the whole disc.
3. Press " REC" again, the display will show "ONE" and "USB" flashing, encoding the current

playing track.
4. When you press "
5. After completing of recording, unit will stop playback automatically.
Remark:
- The recording speed is 1:1 and according to the actual playing time of the CD track
The recording format is preset at – MP3 bit rate: 128 kbps, sampling rate: 44.1kHz
-
- After completing of encoding, unit will stop playback automatically
B)Copy of MP3 file
If putting a MP3 disc instead of a CD-disc, the system will copy the files to the USB if press
" REC". The operation procedures is same as CD encoding as stipulate on above, and the

system will switch to copying mode only if MP3 file being read.
C)DAB encoding
1. Operate tuner mode refer above listening to radio section to receive the station you would
like to encode.
2. Press "REC" for start the encoding; "REC" and "USB" icon is flashing.
REMARK : FM encoding is not supported
D) Cassette/Aux /Phono/BT encoding
1) Set the unit to your desired mode and then start to playback the track would like to encode.
2) Then start to playback the track would like to encode, then press "
3) The LCD display flash with "REC" and USB" icon. Now the system is starting the encoding
mode.
Remark: In all modes press "STOP " to interrupt the recording mode any time.
E) Track Separation (on remote control only)
You can divide the recording music from tape or Aux/DAB etc. into USB track by track during
encoding. Every time when press "
system will generate a new track and continuous the recording.
ENCODING
REC" while CD playing the actual title will be recorded from beginning.

" (track separation) (on remote control) once during, the
NR565 / English Instruction Manual
9
REC.
