Functional Discription; Switching On For The First Time; Heat Indicator - ersa IRHP 200 Betriebsanleitung

Functional discription

6. Functional discription
6.1

Switching on for the first time

Place the IRHP 200 on the workstation as shown in the illustration below. Switch on the
control station with the red switch and select the desired preheating temperature
option:
PCB holder PH100
6.2

Heat indicator

ersa IRHP 200
Note:
Control station operation is explained in the RA 4500 D operating instruc-
tions included in the scope of delivery!
option:
cooling fan
Your IRHP200 heating plate is equipped with an indicator
in the form of a red LED, which informs you if the heating
plate is dangerously hot to touch. When switching the unit
off, the LED glows after until the temperature has dropped
into a region safe for touch.
3BA00133 • 2013-06-25 • Rev. 5
option:
PCB X/Y table
Power
switch
23