Disposal; Declara On Of Conformity - LR-Cal XP100 Bedienungsanleitung

Disposal

In the European Union, electronic equipment must not be treated as domes c waste,
but must be disposed of professionally in accordance with Direc ve 2002/96/EC of
the European Parliament and Council of 27th January 2003 concerning old electrical and electronic
equipment. A er the end of its use, please dispose of this device in a manner appropriate to the
relevant legal requirements.
In the European Union, ba eries must not be trated as domes c waste, but must be disposed of
proffesionally in accordance with Direc ve 2006/66/EC of the European Parliament and Council of
6th September 2006 concerning ba eries and accumulators. Please dispose of ba eries in a
manner appropriate to the relevant legal requirements.

Declara on of conformity

Declara on of conformity in accordance with the EC Low Voltage Direc ve 2006/95/EC and the EC
Direc ve 2004/108/EC about electromagne c compa bility.
Herewith, we declare that the temperature measuring devices
XP 100
LR-Cal LRT 1000
are developed, constructed and produced in compliance with the named EC direc ves.
Applied harmonised standard: EN 61326-1:2013
The marking is found on the rear of the device.
Manufacturer:
DRUCK & TEMPERATUR Leitenberger GmbH
Bahnhofstr. 33
72138 Kirchentellinsfurt
Telefon: +49 (0) 7121-90920-0
Telefax: +49 (0) 7121-90920-99
E-Mail: DT-Export@Leitenberger.de
Kirchentellinsfurt, 23.02.2015
Managing Director: Gernot Coulon
DRUCK & TEMPERATUR Leitenberger GmbH • Bahnhofstr. 33 • D-72138 Kirchentellinsfurt • GERMANY
Tel. +49 (0) 7121-90920-0 • Fax +49 (0) 7121-90920-99 • DT-Info@Leitenberger.de •
XP100 und
XP100 and
(XP 101)
37
LR-Cal LRT 1000
LR-Cal LRT 1000
www.LR-Cal.net
MANUAL
• www.druck-temperatur.de