Sony FW-98BZ50L Installationsanleitung Seite 6

Installing the LCD Monitor to the
Wall from Table-Top Stand*
*
Only for limited region/country/model.
1
Remove the stand covers.
2
Remove the screws from the
rear of the LCD Monitor.
3
Attach the Wall-Mount Bracket
(not supplied) using the screws
(not supplied).
When using an electric screwdriver, set the torque
setting to approximately 1.5 N·m {15 kgf·cm}.
Do not lift the Wall-Mount Bracket (not supplied)
before the screws (two screws each for left/right)
are secured. This may distort the Wall-Mount
Bracket or the LCD Monitor cabinet.
6
(EN)
Wall-Mount Bracket
(not supplied)
Screw (not supplied)
4
Detaching the Table-Top Stand
from the LCD Monitor.
To detach the Table-Top Stand from the LCD
Monitor, remove the screws
Note
• Be careful when lifting the LCD Monitor as the
Table-Top Stand is detached, the Table-Top Stand
may topple over and cause personal injury.
• Take care when removing the Table-Top Stand from
the LCD Monitor to prevent it from falling over and
damaging the surface that the LCD Monitor is
sitting on.
FW-85BZ40L / 85BZ35L / 85BZ30L / 75BZ40L /
75BZ35L / 75BZ30L / 65BZ40L / 65BZ35L /
65BZ30L / 55BZ40L / 55BZ35L / 55BZ30L /
50BZ30L / 43BZ30L
Installing the LCD Monitor to the
Wall from Carton*
*
Only for limited region/country/model.
1
Remove the screws from the
rear of the LCD Monitor.
.