Application Overview - Danfoss DEVIflex 6T Installationsanleitung

Installation Guide
6

Application overview

Cable type
DEVIflex™ 6T, DEVIflex™ 10T
DEVIflex™ 18T, DEVIflex™ 20T
DEVIcomfort™ 10T
DEVIflex™ 30T
DEVIsafe™ 20T
DEVIsnow™ 20T (DTCE-20)
DEVIsnow™ 30T (DTCE-30)
DEVIsnow™ 300T (DTCE-300)
DEVIsnow™ Drum (DTCE)
DTCE-100
DTCE-150
DTCE-175
DTCE-200
DEVIbasic™ 10S (DSIG-10)
DEVIbasic™ 20S (DSIG-20)
DEVIbasic™ Drum (DSIG)
DEVIsport™ (DSM3) 1) 2)
DEVImulti™ PVC (DMIH)
DEVIasphalt™ 30T (DTIK-30)
DEVIasphalt™ 300T (DTIK-300)
DEVIaqua™ 9T 2) 3)
DEVIpipeheat™ 10 (DPH-10)
DEVIpipeguard™ 1) , DEVIhotwatt™
DEVIiceguard™ 1)
Heating cables/mats can be customized for the specific project, depending on voltage, required output, length of heating
1)
cable and length of cold leads.
Note: It is the full responsibility of the installer/designer to use proper cold lead dimensioned for the purpose and
assembly sets that establish sufficient mechanical strength, flammability resistance and water tightness - and to design
the heating unit with correct output for the specific application to avoid overheating of the cable or building materials.
2) The heating cable shall only be installed in concrete or used while fully covered with non-flamable material e.g. soil or
similar.
The cable are approved for use in contact with drinking water or water for human consumption - comply to Danish GDV
3)
(Godkendt til drikkevand) demands.
4) The cable are not approved for installation inside the water pipe and for use in contact with drinking water or water for
human consumption, waste water, etc.!
Regarding other types of applications please contact your local DEVI sales company.
More information about applications can be found at www.devi.com
6
Heating cables
M2
M2
M1
M2
M2
M2
M2
M2
1) M2
M2
M2
M2
M2
C
C
C
1)
MMM
1) M2
M2
M2
M1
1) 4) M2
1) M2
M2
x x x x x
x x
x
x x
x x
x
x
x
x
x x x x
x x
x x x x
x
x x
x
x
x
x
Applications
x x
x x
x
x x x x
x x x x
x x
x x
x x x
x
x x x
x x x
x x x
x x x
x x x
x
x
x
x x
x x
x
x x
x x
x x
x
DEVI