Harman AKG AMM 10 Bedienungsanleitung Seite 47

All manuals and user guides at all-guides.com
NOTE
AMM 10
1) Undo the two screws on the underside of the AUX/LINE OUT or LINE OUT module. These
screws fasten the black cover plate on the underside and the metal strain relief clip on
the upper side.
Figure 20: Unscrewing the base plate
2) Remove the four blue jumpers from the upper side of the circuit board and mount the
transformer module in their place.
Figure 21: Removing jumpers
Jumpers
After removing the jumpers, keep them in a safe place in case you want to remove the TRAFO
OUT module in the future. In that case, put the four blue jumpers back in their original position.
Installation and Connection
47