Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Description
2 Description
Introduction
Items supplied with starter kit
Optional Accessories
Summary
Modules
36
All manuals and user guides at all-guides.com
Thank you for purchasing an AKG product. This Manual contains important instructions for
setting up and operating your equipment. Please take a few minutes to read the instructions
below carefully before operating the equipment. Please keep the Manual for future
reference. Have fun and impress your audience!
Please check that the packaging contains all the components. If anything is missing, contact
your AKG dealer at once.
• 1 x MIC/LINE input module (D-Mic IN)
• 1 x AUX input module (CD/PC IN)
• 1 x master output module (MASTER CONTROL) with balanced stereo output
• 1 x STEREO-LINE output module (XLR OUT PAS.)
• 1 x power supply PSU 10
• 4 x mounting frames
• 16 x screws
For optional accessories, refer to the current AKG catalog or folder, or visit www.akg.com.
Your dealer will be glad to help.
The AMM 10 multi-media connection system is a flexible, modular mixing system with a wide
range of input and output modules. The individual modules are connected by a normal
network cable (CAT 5) and can be fitted in standard mounting frames. Thanks to the plug-in
design of the terminals, fitting the modules is very easy and requires little prior knowledge.
The modules can be fitted inside deep flush-mounted boxes or device boxes, cable ducts,
floor boxes, etc., and can be combined with the cover frames of virtually every type of
European switch.
Thanks to the flexible design, you can insert the required modules in the places where they
are used. The system is designed to allow you to bridge long distances. This means that the
input modules and the "master module" can be as far as 100 metres apart. Distances of up to
100 metres are also possible between the master module and the output modules.
Thanks to the flexible, modular system, the output signal can be tapped wherever you like.
The maximum number of modules is limited only by the capacity of the power supply unit. Up
to 10 modules can be connected with the supplied power supply unit PSU 10. Higher powered
supply units are available on request.
MASTER CONTROL
The control and master output module is the heart of the system.
It receives incoming audio signals from all the input modules and, after amplification and tone
adjustment, passes them to all the output modules.
This module must be connected to the system power supply (e.g. PSU 10).
D - MIC IN
The Mic/Line input module is a universal preamplifier module for connection of dynamic
microphones or balanced line sources.
AMM 10
Werbung
