Spare Parts; Packaging, Transport, Storage - bürkert 6012 Bedienungsanleitung

Warning!
Risk of injury from improper maintenance!
• Maintenance may be carried out by authorized techni-
cians only and with the appropriate tools!
Risk of injury from unintentional activation of the
system and an uncontrolled restart!
• Secure system from unintentional activation.
• Following maintenance, ensure a controlled restart.
9.2. malfunctions
If malfunctions occur, check
→
the line connectors
→
the operating pressure
→
the power supply and valve control
If the valve still does not switch, please contact your
Bürkert Service.
english
24
11. packaging, TranspOrT,
sTOrage
note!
Transport damages!
Inadequately protected equipment may be damaged
during transport.
• During transportation protect the device against wet
and dirt in shock-resistant packaging.
• Avoid exceeding or dropping below the allowable
storage temperature.
Incorrect storage may damage the device.
• Store the device in a dry and dust-free location!
• Storage temperature: -40 - 80 °C.
english
26
10.

spare parTs

Caution!
Risk of injury and/or damage by the use of incorrect
parts!
Incorrect accessories and unsuitable spare parts may
cause injuries and damage the device and the sur-
rounding area.
• Use only original accessories and original spare parts
from Bürkert.
Nut
Coil
Fitting
12. dispOsal
→
Dispose of the device and packaging in an environmen-
tally friendly manner.
note!
Damage to the environment caused by device compo-
nents contaminated with media.
• Observe applicable regulations on disposal and the
environment.
Note:
Observe national waste disposal regulations.
Type 6012
Coil and fitting can
be ordered com-
plete by quoting
the identification
number of the
device.
(see label)
Wearing part set on
request.
english
25 25
english
27 27