Polytron HDI 2 SDI Bedienungsanleitung Seite 27

 Decoder -> General:
Click on "General" in the upper menu bar. The parameters for the ASI outputs 1/2 and the IP output can be set via the
submenu that then appears.
After the settings have been made, accept them by clicking on "Apply".
 Decoder -> PID Pass:
After clicking on "PID Pass", the input window is displayed, in which PIDs are added to be issued at the output. In
some cases there are PIDs which cannot be assigned to a program (e. g. EPG, NIT tables, etc.). However, these
should be available at the output without changes.
By clicking on further PIDs can be selected. After selecting all PIDs, click on "Set" to apply them.
Click on "Del-All" to delete all selected PIDs at once.
Abbildung / Figure-7
Click this button to generate more
rows to add PIDs.
27