AL-KO 3.22 SE Bedienungsanleitung Seite 184

EC declaration of conformity
We hereby declare that this product, in the form in which it is marketed, meets the requirements of the harmonised EU
guidelines, EU safety standards, and the product-specific standards.
Product
Electric lawnmover
Serial number
G1001005
Model
3.22 SE
3.82 SE
Sound power level
measured / guaranteed
EN ISO 3744
3.22 SE 94 / 96 dB(A)
3.82 SE 94 / 96 dB(A)
Warranty
If any material or manufacturing defects are found during the statutory customer protection period, we will either repair
or replace the equipment, whichever we consider the more appropriate. This statutory period may vary according to the
legislation in force in the country where the equipment was purchased.
Our warranty is valid only if:
The equipment has been used properly
„
The operating instructions have been followed
„
Genuine replacement parts have been used
„
The following are not covered by warranty:
Paint damage due to normal wear
„
Wear parts identified by a border xxx xxx (x) on the spare parts list
„
Combustion motors – these are covered by a separate warranty from the manufacturer concerned
„
To make a claim under warranty, please take this statement of warranty and proof of purchase to the nearest autho-
rised customer service centre. This warranty does not affect the usual statutory rights of the customer relative to the
seller.
184
Manufacturer
AL-KO Geräte GmbH
Ichenhauser Str. 14
D-89359 Kötz
EG-Richtlinien
2006/42/EG
2006/95/EG
2004/108/EG
2000/14/EG
2002/96/EG
2011/65/EG
Conformity evaluation
2000 /14/EG
Appendix VIII
Notified body
TÜV Industrieservice GmbH
TÜV Süd Gruppe
Westendstraße 199
D-80686 München
The warranty is no longer valid if:
The equipment has been tampered with
„
Technical modifications have been made
„
The trimmer was not used for its intended purpose
„
(for example, used for commercial or communal ap-
plications)
Executive Officer
Andreas Hedrich
Ichenhauser Str. 14
89359 KOETZ
DEUTSCHLAND
Harmonised standards
DIN EN 60335-1
VDE 0700-1
DIN EN 60335-2-77
VDE 0700-77
DIN EN ISO 14982
Kötz, 2014-10-08
Wolfgang Hergeth, Managing Director
GB
GB