Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6
Transport and Storage
• Transport and store the device only in the original packaging.
• Store the device in a dry place (no condensation) and vibration-free.
• Do not drop the device.
7
Mounting and Installation
The device is approved for use in gas explosion hazardous areas of Zones 1 and 2 and
dust explosion hazardous area of Zones 21 and 22 and in safe areas.
Explosion hazard due to incorrect installation of the device!
Non-compliance results in severe or fatal injuries.
• Carry out installation strictly according to the instructions and
• Select and install the electrical device so that explosion protection
• The device must only be installed by trained qualified personnel
7.1
Dimensions / Fastening Dimensions
Dimensional drawings (all dimensions in mm [inches]) – Subject to modification
5,50
69 [2,72]
Ø
[
0,22]
Ø
C
A
B
D
04466E00
8118/.1.
Design size 1
133275 / 8118605300
2018-08-07·BA00·III·en·08
national safety and accident prevention regulations to maintain
the explosion protection.
is not affected due to external influences, i.e. pressure conditions,
chemical, mechanical, thermal and electric impact such as
vibration, humidity and corrosion (see IEC/EN 60079-14).
who is familiar with the relevant standards.
5,50
99 [3,90]
Ø
[ 0,22]
Ø
C
A
B
D
04467E00
8118/.2.
Design size 2
DANGER
5,50
129 [5,01]
Ø
[ 0,22]
Ø
C
A
B
D
04468E00
8118/.3.
Design size 3
Junction Boxes
Series 8118
Transport and Storage
L
04469E00
Size
Length
[mm]
min. max.
M20
25
31
M25
27
33
M32
32
39
Additional
dimension for cable
glands, Series 8161
13
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Werbung
