Royal Catering RCNW-1 Bedienungsanleitung Seite 6

Before first use, assemble the device in accordance with the illustrations. Before connecting the power
supply, the bulb should be installed in the correct place. To turn on the device, use the main switch located
near the power cord by switching it to the „I" position.
The drawer for crumbs should be emptied regularly.
Device control(only for RCNW-1L)
Once the device is assembled and connected to the power, the basic colours and light intensity can be
changed and other functions can be selected. Remove the film from the batteries before using the remote
control.
1
Description of each key
Group 1: These buttons, depending on the selected functions, are
2
used to adjust the brightness of the device (group 2) or to regulate
the frequency of the colour change etc (group 3)
Group 2: The buttons are used to change light colour.
Group 3: The buttons activate a pre-programmed function (automatic
colour changes, etc.).
ON – The button is used to turn the illumination on
3
OFF – The button is used to turn the illumination off
TRANSPORTATION AND STORAGE
Shaking, crashing and turning upside down of the device should be prevented when transporting it. Store it
in a properly ventilated location with dry air and without any corrosive gas.
CLEANING AND MAINTENANCE
• Disconnect from electricity when cleaning equipment.
• Use cleaner without corrosive substances to clean surface.
• Dry all parts well after cleaning before the device is used again.
• Store the unit in a dry, cool location, free from moisture and direct exposure to sunlight.
REGULAR CONTROL OF THE DEVICE
Regularly control whether the device is damaged. If it should be damaged, please stop using it immediately
and contact your customer service to solve the problem.
What to do in case of a problem?
Please contact your customer service and prepare the following information:
• Invoice number and serial number (the latter is to be found on the technical plate on the device).
• If relevant, a picture of the damaged, broken or defective part.
• It will be easier for your customer service clerk to determine the source of the problem if you give
a detailed and precise description of the matter. Avoid ambiguous formulations like "the device does
not heat", which may mean either that it does not heat enough or that it does not heat at all. The more
detailed your information, the better the customer service will be able to solve your problem rapidly
and efficiently!
CAUTION: Never open the device without the authorization of your customer service. This can lead to
a loss of warranty!
10
INSTRUKCJA OBSŁUGI
R C N W - 1

 R C N W - 1 L
Rev. 23.08.2017
expondo.de