Cleaning and maintenance
TEST MODE
OFF
FILL MODE
AIR EXTRACTION
72/82
–
Screw the lid with the hose onto the new canister.
–
Push the hose well down so that it touches the bottom of the canister.
–
Put the canister back in the device.
–
Close the bed base. You should hear the bed base click into place.
Venting
–
Go to the Professional Setup Manager.
–
Activate the fill mode in the AQUA FRESH AROMA menu.
–
Close the canopy.
The system will now be ventilated for 30 seconds. The AQUA SYSTEM liquid
will be released from the nozzles during this period.
30
–
Then test the AQUA SYSTEM in test mode. In test mode, the nozzles
spray for 3 seconds. Repeat the ventilation process if it does not work.
18031 / 0
4.17
Use a vacuum cleaner to prevent dust particles.
–
Vacuum the air intake openings.
NOTE:
To ventilate, access to the Professional Setup Manager in
the Control Center is required.
Cleaning the air intake openings