Werbung
SETTING FURTHER CHANNELS
Motor antenna setup (DiSEqC 1.2)
Note:
The following description about the LNB
7
settings premise a substantial expertise
about the satellite systems. Ask your
specialist dealer.
Your television supports DiSEqC 1.2 motorized
satellite systems. This feature allows to control
the satellite through your television.
Adjust the satellite antenna position according
to each satellite. These settings can be stored
and the antenna can be moved to a preset
position.
1 Open the menu with »MENU«.
2 Select menu item »Settings« with »
<
>
»
« or »
« and press »OK« to confirm.
3 Select the menu item »Source« with »
<
»
« and press »
« to confirm.
V
– »Source« menu is active.
4 Select the line »Manual Channel Search«
with »
« or »
« and press »OK« to
V
Λ
confirm.
5 Select the option »Satellite (DVB-S/S2)«
with »
« or »
« and press »OK« to
V
Λ
confirm.
6 Activate the option »Antenna Settings« with
»
« (blue).
– The »Antenna Settings« menu is displayed.
7 Select the line »DiSEqC Mode« with »
or »
« and select »DiSEqC1.2« with »
Λ
>
or »
«.
– The line »DiSEqC 1.2 SETTINGS« is
active.
8 Select the line »DiSEqC 1.2 SETTINGS«
with »
« or »
« and press »OK« to
V
Λ
confirm.
– »DiSEqC 1.2 SETTINGS« menu is
displayed.
Television / User Manual
9 Use »
Moving Mode
Set the Moving Mode with »
»Discrete« or »Continuous«.
– »Discrete«: Moves the antenna to west or
east for the determined step size.
– »Continuous«: Moves the antenna to west
or east continuously.
Step Size
With »
the antenna has to rotate. »Step Size« is
active when »Moving Mode« is selected as
»Discrete«.
Move Motor
Adjusts the antenna for the selected satellite.
Set the antenna to »West« with »
«, »
«,
V
Λ
»East« with »
– »Go To Stored Position«: Moves the
>
« or
antenna to the preset satellite position.
Maximum 50 positions can be saved.
Select the setting with » « (green) button,
select predefined position with »
>
»
Antenna will mode to saved position.
– »Store Position«: Stores antenna's current
position. Select setting with » « (red)
button, select recording position with »
or »
button.
Limit Position
– Sets the limit position which the antenna
«
V
will be able to move and allows the
<
«
antenna to move within the determined
limits. With »
»West« direction and with »
limit position in »East« direction.
Reset DiSEqC 1.2 Limit
– Resets the limit positions set for the
antenna.
10 Press »EXIT« to end the setting.
-----------------------------------------------------
« or »
« to select necessary items.
V
Λ
<
>
« or »
« select the number of steps
>
«.
« and confirm with » « (green) button.
>
« and confirm with » « (green)
<
« specify a limit position in
<
>
« or »
« to
<
« and to
<
« or
<
«
>
« specify a
99 / 119 TR
Werbung
