Werbung
SETTING FURTHER CHANNELS
Antenna settings and searching
for digital channels from a
satellite automatically
Note:
The following description about the LNB
7
settings premise a substantial expertise
about the satellite systems. Ask your
specialist dealer.
1 Open the menu with »MENU«.
2 Select menu item »Settings« with »
<
>
»
« or »
« and press »OK« to confirm.
3 Select the menu item »Source« with »
<
»
« and press »
« to confirm.
V
– »Source« menu is active.
4 Select the line »Automatic Channel Search«
with »
« or »
« and press »OK« to
V
Λ
confirm.
5 Select the option »Satellite (DVB-S/S2)«
with »
« or »
« and press »OK« to
V
Λ
confirm.
6 Select the line »Antenna Settings« with »
or »
« and press »OK« to confirm.
Λ
– The »Antenna Settings« menu is displayed.
7 Select and set the required option for the
antenna settings with »
Satellite
Press »OK« then select the required satellite
with »
« or »
« and press »OK« to
V
Λ
confirm.
LNB Type
Press »OK« then select the required LNB
<
>
Type with »
« or »
data and confirm with » « (green).
LNB Power
Set the LNB power to »Off«, »13/18V« or
»14/19V« depending on the LNB type by
<
>
using »
« or »
«.
LNB selection
Only necessary for »DiSEqC 1.0« or
»DiSEqC 1.1«, see chapter "Searching
for antenna settings for DiSEqC 1.0/1.1
and digital channels from a satellite
automatically".
8 Exit the antenna settings with »
Television / User Manual
«, »
«,
V
Λ
>
« or
«
V
« or »
«:
V
Λ
«, enter the required
« (blue).
-----------------------------------------------------
9 Select the Channel Type.
Press »
« or »
« to select whether you
V
Λ
want to search for only digital channels
(Digital) or only radio channels (Radio) or
both (Digital + Radio) and press »OK« to
select and mark or unmark the »Digital«
and/or »Radio« items.
10 Select Scan Mode.
To select whether you want to search for
only free digital television channels (Free),
only scrambled digital television channels
(Scrambled) or both (Free + Scrambled),
« and press OK« to select
press »
« or »
V
Λ
and mark or unmark the »Free« and/or
»Scrambled« items.
11 Press » « (red) to start searching.
Notes:
When updating via the same satellites a
7
security query is displayed at the start of a
search.
If the previously stored channels should
7
be retained in the channel list and the new
channels found be added to it, then press
» « (green).
If » « (red) is pressed, the saved channels
7
will be deleted from the current channel list.
– The »Digital Searching« menu appears,
and the scan for TV channels begins.
– The search is complete as soon as the
message »Search is completed!« appears.
Note:
The search can be aborted with »EXIT«.
7
12 Switch to the Channel Editor with »
(yellow);
or
press »EXIT« to end the setting.
«
95 / 119 TR
Werbung
