Reflexion LDDX22IBT Bedienungsanleitung Seite 49

PREPARE THE APPLIANCE FOR USE
Note:

The stand foot is not included in the scope of delivery and must be purchased separately as an
accessory.

Do not overtighten the screws. You could damage the screws or the thread.
Picture 1:
1. Place the TV set (A) on a flat and lightly padded surface with the display facing downwards.
2. Screw the centre piece (B) to the TV set with the screws (C) included in the scope of delivery and a
screwdriver (not included) as shown in Fig. 1.
Picture 2:
1. Hold the stand foot (D) against the bottom of the centre piece (C) and make sure it is aligned correctly
(see FIG. 2).
2. Screw the stand (D) to the TV with the screws (E).
OPERATING BUTTONS AND CONNECTIONS
Control panel on the unit
Reception radius for the
remote control receiver.
Notes:

Note that some functions can only be performed with the remote control.

Hold the remote control receiver

The reception radio from the infrared receiver of the TV set is at approx. 60°.
INPUT
MENU
CH+ / CH-
VOL+ / VOl-
/ POWER
Open the input sources menu.
Device menu: Open / Close
CH+: Next programme
CH-: Previous programme
VOL+: Louder
VOL-: Quieter
Power: On / Off (Standby)
Keep infrared receiver free.
49
UK