Ec-Declaration Of Incorporation - Nicotra Gebhardt RZR Betriebsanleitung

EC-Declaration of Incorporation

The manufacturer:
herewith declares, that the following product:
Product designation:
Type nomination:
Serial n°:
Year of manufacture:
qualifies as a partly completed machine, according to Article 2, clause "g" and complies with the following
basic requirements of the Machine Directive (2006/42/EC): Annex I, Article 1.1.2; 1.3.7
The partly completed machine may be put into operation only if it has been stated that the machine into which
the uncompleted machine has to be incorporated complies with the requirements of the Machine Directive
(2006/42/EC).
The following harmonised standards
EN ISO 12100
EN ISO 13857
The manufacturer is committed to providing the special documents to Annex VII, Part B, for partly completed
machines to any state authority per post/email on request.
Waldenburg, 21.04.2016
Representative for the documentation: Michael Hampel
Head of Production
i.V. T. Ehrhardt
For the complete list of applied standards and technical specifications please see the manufacturer's documentation.
1)
Nicotra Gebhardt GmbH, Gebhardtstraße 19-25,
74638 Waldenburg, Germany
Centrifugal fan
RZR / RER .. -2G; RZR / RER .. -3G
see type plate
see type plate
have been applied:
1)
Safety of machines – Fundamental terms, general design principles
Safety of machines – Safety distances to hazardous areas
Research and Development Director
i.V. Dr. J. Anschütz
English
EN-31/32