Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5. Press ON /OFF switch , the red indicator will be illuminated. and coffee will drop out automatically
after a while. Note: at any time, you can take out carafe to serve but the time cannot exceed 30
seconds, otherwise the coffee may overflow from the edge of funnel.
6. The coffee maker will turn to keeping warm mode if brewing coffee is finished. At the time you
can cut off power.
7. After product finishing working, please shut down the power switch immediately.
WARNING: Do not leave the coffee maker unattended during making the coffee, as you need operate
manually sometimes!
1. Cut off power source and let the coffee maker cool down completely before cleaning.
2. Clean housing of coffee maker with moisture-proof sponge often and clean water tank, drip tray
and removable shelf regularly then dry them.
Note: Do not clean with alcohol or solvent cleanser. Never immerse the housing in water for cleaning.
3. Detach the metal funnel through turn it clockwise, get rid of coffee residue inside, then you can
clean it with cleanser, but at last you must rinse with clear water.
4. Clean all the attachments in the water and dry thoroughly.
CLEANING MINERAL DEPOSITS
To keep your coffee maker operating efficiently, you should clean away the mineral deposits left by the
water every three months or according to the water quality in your area and the frequency use the
appliance, the detail is as follows: fill the carafe with one part of white vinegar and three parts of cold
water, pour the water and vinegar mixture into the tank, do not place into coffee ground, brewing the
water-vinegar solution per "Before the first use", repeat it until no yellow liquid comes out if necessary,
then pour out the mixture, brewing with tap water until no vinegar odor is left..
symptom
carafe leakage water or water
leaks out from lid of jug
The coffee drops too slowly or
overflows from the edge of
removable funnel
coffee residue in jug
water leaks from the bottom of
coffee maker.
the coffee maker can not work
any more.
Do not take apart the appliance by yourself if the cause of failure is not found , you had better
contact certified serving center.
CHAL-TEC Vertriebs- + Handels GmbH; Wallstraße 16; 10179 Berlin, Germany
CLEAN AND MAINTENANCE:
TROUBLESHOOTING
cause
the jug is not located properly
coffee powder is too fine or
contain too fat
nylon filter too dirty
filter is blocked
coffee powder is too fine.
leak water in the unit
the coffee maker heats in
abnormal state, which causes
its automatic safety protective
system is activated.
lack water
corrections
let centreline of jug aligns with
leakage opening of funnel well.
use coarser coffee powder.
clean nylon filter with clear
water.
clean filter
choose coarser coffee powder.
do not use the coffee maker
again, contact with certified
serving center.
the coffee maker should be able
to rework after keeping still for
30 seconds, otherwise contact
with certified serving center.
Fill enough water
6
Werbung
Inhaltsverzeichnis
