cecotec READYWARM 2070 MAX CERAMIC ROTATE SMART Bedienungsanleitung Seite 36

ENGLISH
- Place the appliance in its original box or cover it to protect it from dust. Store it in a cool
and dry place.
5. TROUBLESHOOTING
Do not repair or disassemble the device yourself, unauthorised repair attempts will void the
warranty and may cause personal injury.
Problem Possible cause
There is 1. The power cord is not connected.
no power
2. No power comes out of the socket.
supply
3. The power switch on the back of the
heater is in the off position.
Smell 1. The appliance is new. When using the
appliance for the first time, the motor
The
fan may emit a slight odour. The smell
appliance
will disappear within the first week of
produces
use.
an
unusual
odour
Strong 1. The appliance is not placed on a flat
surface.
vibrations
and 2. The unit may be damaged.
noises
If the problem persists after trying the above solutions, please contact Cecotec's official
Technical Support Service.
6. TECHNICAL SPECIFICATIONS
Product reference: 08280
Product: ReadyWarm 2070 Max Ceramic Rotate
Power: 2000 W
Voltage: 220 -240 V
36 READYWARM 2070 MAX CERAMIC ROTATE SMART
Solution
1. Install the power cord.
2. Check that the socket is
turned on.
3. Make sure the power switch
on the back of the heater is in
the on position.
No action required.
1. Place it on a flat surface. An
anti-vibration mat can be
placed underneath.
2. If the heater is damaged,
stop using it and contact the
Technical Support Service of
Cecotec.