Troubleshooting; Service Data; Energy Efficiency - Zanussi ZOHKC1X2 Benutzerinformation

Back lamp
Step 1 Turn the glass cover to remove it.
Step 2 Clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Install the glass cover.

12. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
12.1 What to do if...
In any cases not included in this table please
contact with an Authorised Service Centre.
Problem
The oven does not heat
up.

12.2 Service data

If you cannot find a solution to the problem yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove the rating plate from the appliance cavity.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

13. ENERGY EFFICIENCY

13.1 Product Information and Product Information Sheet
Supplier's name
Model identification
Energy Efficiency Index
36 ENGLISH
Check if...
The fuse is blown.
Problem
The door gasket is dam‐
aged.
End of Cooking - is not
set.
The lamp does not work.
.........................................
.........................................
.........................................
Zanussi
ZOHKC1X2 944068363
ZOHXC1K2 944068366
ZOHXC1X2 944068365
95.1
Check if...
Do not use the oven.
Contact an Authorised
Service Centre.
Set: End of Cooking. Re‐
fer to "Clock functions".
The lamp is burnt out.